PD-25-001POS-SRP

Shelf-ready packaging case

Retail-ready case derived from an RSC: a perforated front and top lift away on shelf and leave a display tray, with a parameterised perforation pattern and tear-strip start notches.

Drawing…

CutCreaseGlue area

Flat blank: —
Rule length: —
Area: —
Panels: —

Size & options

Dimensions

Length (L)

Between 60 and 1,200

Width (W)

Between 60 and 1,200

Height (H)

Between 40 and 800

Tray height at the front

Between 10 and 800

Tray height at the back

Between 10 and 800

Flaps & tabs

Flap depth

Manufacturer's joint width

Between 15 and 120

Joint taper

Between 0 and 30

Glue flap side

Which edge of the blank carries the manufacturer's joint. Right mirrors the whole blank - every panel, flap and lock - so the box folds the same way with the joint on the other side.

Slot width

Between 0 and 25

Features

Explode the perforationUse a tear strip

Start notch

Start notch width

Between 6 and 120

Start notch height

Between 4 and 90

Start notch inset

Between 0 and 300

Mark the adhesive areas

Production

Board caliper

Between 0.5 and 10

Grain / flute direction

Add bleed contourAdd safety contourDraw dimension linesAdd registration marks

Advanced settings+

Bleed

Between 0 and 20

Safety margin

Between 0 and 30

Order this box

Request a quote

Our structural designers review the final dieline before production.