PD-14-001FEFCO-0210

Half Slotted Container with cover (HSC)

Slotted corrugated case with flaps on one end only, so the opposite end stays open. Optionally drawn together with the matching telescoping cover as a second blank on the same sheet.

Drawing…

CutCreaseGlue area

Flat blank: —
Rule length: —
Area: —
Panels: —

Size & options

Dimensions

Length (L)

Between 40 and 2,000

Width (W)

Between 40 and 2,000

Height (H)

Between 30 and 2,000

Flaps & tabs

Closed end

Flap depth

Manufacturer's joint width

Between 10 and 150

Joint on

Joint taper

Between 0 and 40

Glue flap side

Which edge of the blank carries the manufacturer's joint. Right mirrors the whole blank - every panel, flap and lock - so the box folds the same way with the joint on the other side.

Slot width

Between 0 and 30

Slot corner radius

Between 0 and 40

Features

Draw the separate cover

Cover depth

Between 15 and 1,500

Cover slide clearance

Between 0 and 20

Gap between the two blanks

Between 5 and 200

Hand holes in end panelsVentilation slotsPerforated tear strip on the cover

Production

Board caliper

Between 0.1 and 12

Grain / flute direction

Add bleed contourAdd safety contourDraw dimension linesAdd registration marks

Advanced settings+

Bleed

Between 0 and 20

Safety margin

Between 0 and 30

Order this box

Request a quote

Our structural designers review the final dieline before production.