PD-08-005CUSTOM-GABLE-TUCK

Gable carrier with tuck bottom

The gable carrier with a tuck-end bottom: no glue anywhere below the handle, so it is erected by hand and can be opened from the bottom to be refilled. The small gift and favour box of the trade.

Drawing…

CutCreaseGlue area

Flat blank: —
Rule length: —
Area: —
Panels: —

Size & options

Dimensions

Length (L)

Between 15 and 1,200

Width (W)

Between 10 and 1,200

Height (H)

Between 15 and 1,600

Top gable rise

Between 3 and 400

Top handle strip height

Between 10 and 300

Top handle strip width

Between 20 and 700

Flaps & tabs

Manufacturer's joint width

Between 0 and 80

Top handle strip corner radius

Between 0 and 100

Bottom lid depth

Between 0 and 1,200

Bottom tuck depth

Between 0 and 200

Bottom tuck corner radius

Between 0 and 30

Bottom tuck edge bow

Between 0 and 25

Bottom dust flap depth

Between 0 and 400

Bottom dust flap corner radius

Between 0 and 20

Glue flap side

Which edge of the blank carries the manufacturer's joint. Right mirrors the whole blank - every panel, flap and lock - so the box folds the same way with the joint on the other side.

Production

Glue seam on

Which hand the joint is on. It follows the gluer the job is booked on, and it mirrors the whole blank.

Board caliper

Between 0.1 and 12

Grain / flute direction

Add bleed contourAdd safety contourDraw dimension linesAdd registration marks

Features

Top punch the carry handle

Top carry handle width

Between 20 and 400

Top carry handle height

Between 8 and 120

Top glue the handle strips togetherTop hook the strips instead of gluing

Advanced settings+

Joint taper

Between 0 and 30

Bottom tuck shoulder

Between 0 and 6

Bottom tuck taper

Between 0 and 12

Bottom dust flap chamfer angle

Between 20 and 90

Bleed

Between 0 and 20

Safety margin

Between 0 and 30

Order this box

Request a quote

Our structural designers review the final dieline before production.