PD-06-003CUSTOM-DRAWER-2

Drawer box with thumb-cut sleeve (pinwheel-corner drawer)

Two part slide box: a sleeve with semicircular finger cut-outs in both open ends, and a drawer whose four walls each carry one glued corner flap, pinwheel fashion, so the drawer can be pushed out from either end.

Drawing…

CutCreaseGlue area

Flat blank: —
Rule length: —
Area: —
Panels: —

Size & options

Dimensions

Drawer length (L)

Between 30 and 600

Drawer depth (W)

Between 30 and 600

Drawer wall height (H)

Between 12 and 250

Sliding clearance

Between 0.2 and 6

Sleeve length allowance

Between 0 and 40

Flaps & tabs

Corner flap depth

Between 0 and 200

Corner flap taper

Between 0 and 30

Sleeve glue flap

Between 6 and 60

Sleeve glue flap taper

Between 0 and 20

Features

Finger cut-out radius

Between 4 and 40

Finger cut-outs on

Which sleeve panels are cut at both open ends.

Production

Part layout

Gap between parts

Between 3 and 200

Draw the drawerDraw the sleeve

Board caliper

Between 0.1 and 12

Grain / flute direction

Add bleed contourAdd safety contourDraw dimension linesAdd registration marks

Advanced settings+

Corner clearance slit

Between 0 and 15

Glue inset

Between 0 and 20

Bleed

Between 0 and 20

Safety margin

Between 0 and 30

Order this box

Request a quote

Our structural designers review the final dieline before production.