PD-03-468ECMA-A55.40.03.03

Side-tuck top, snap-lock bottom carton (straight, both on panel 3)

ECMA A55.40.03.03. Top: a winged lid with no dust flaps: the wings on the lid's sides tuck down inside the side panels, with an optional front tongue. Bottom: a glue-free 1-2-3 snap-lock base closed by hand: two wings and a locking panel that hooks between them. Both closures hang from panel 3, so they open towards the same face and the face opposite carries no closure crease. Panels are counted from the glue joint, as the ECMA code counts them: panel 1 carries the joint and panel 3 is opposite it.

Drawing…

CutCreaseGlue area

Flat blank: —
Rule length: —
Area: —
Panels: —

Size & options

Dimensions

Length (L)

Between 15 and 1,200

Width (W)

Between 10 and 1,200

Height (H)

Between 15 and 1,600

Flaps & tabs

Manufacturer's joint width

Between 0 and 80

Top lid depth

Between 0 and 1,200

Top side tuck depth

Between 0 and 300

Top tuck depth

Between 0 and 200

Top tuck corner radius

Between 0 and 30

Top tuck edge bow

Between 0 and 25

Production

Glue seam on

Which hand the joint is on. It follows the gluer the job is booked on, and it mirrors the whole blank.

Board caliper

Between 0.1 and 12

Grain / flute direction

Add bleed contourAdd safety contourDraw dimension linesAdd registration marks

Features

Top front tuck tongue

Bottom base diagonal angle

deg

Between 25 and 65

Bottom wing overlap

Between 2 and 200

Bottom hook nose depth

Between 3 and 120

Bottom hook nose width

Between 0 and 600

Bottom retaining flap

Between 0 and 400

Advanced settings+

Joint taper

Between 0 and 30

Top side tuck clearance

Between 0 and 20

Top side tuck taper

Between 0 and 20

Bottom hook nose chamfer

Between 0 and 30

Bottom lock slit clearance

Between 0 and 12

Bottom slit between base panels

Between 0 and 20

Bleed

Between 0 and 20

Safety margin

Between 0 and 30

Order this box

Request a quote

Our structural designers review the final dieline before production.