Skip to content

PD-01-004ECMA-A01.20.00.03

Tuck top, open bottom carton (top on panel 3)

ECMA A01.20.00.03. Top: a tuck lid with its tongue and two dust flaps, opened and closed again by hand, with a friction or a slit lock. Bottom: open, with no flaps - for a sleeve, a display, or a carton that slides into a tray or an outer. The top closure hangs from panel 3. Panels are counted from the glue joint, as the ECMA code counts them: panel 1 carries the joint and panel 3 is opposite it. The same die is also ECMA A20.01.03.00: turned end over end, with the glue joint on the other hand, it is the carton filled from its other end.

Drawing…
CutCreaseGlue area
Flat blank
—
Rule length
—
Area
—
Panels
—

Size & options

Dimensions
mm

Between 15 and 1,200

mm

Between 10 and 1,200

mm

Between 15 and 1,600

Flaps & tabs
mm

Between 0 and 80

mm

Between 0 and 1,200

mm

Between 0 and 200

mm

Between 0 and 30

mm

Between 0 and 25

mm

Between 0 and 400

mm

Between 0 and 20

Friction lock: the tongue's shoulders ride over the dust flaps and hold by friction. Slit lock: two slits on the tuck crease make the tongue's corners catch, so the end has to be pressed to open.

Production

Which hand the joint is on. It follows the gluer the job is booked on, and it mirrors the whole blank.

mm

Between 0.1 and 12

Advanced settings+
mm

Between 0 and 30

mm

Between 0 and 6

mm

Between 0 and 12

mm

Between 20 and 90

mm

Between 0 and 20

mm

Between 0 and 30

Order this box
Request a quote

Our structural designers review the final dieline before production.